Simultaneous Sensor and Actuator Fault Reconstruction by Using a Sliding Mode Observer, Fuzzy Stability Analysis, and a Nonlinear Optimization Tool

Abstract

This paper proposes a Takagi–Sugeno (TS) fuzzy sliding mode observer (SMO) for simultaneous actuator and sensor fault reconstruction in a class of nonlinear systems subjected to unknown disturbances. First, the nonlinear system is represented by a TS fuzzy model with immeasurable premise variables. By filtering the output of the TS fuzzy model, an augmented system whose actuator fault is a combination of the original actuator and sensor faults is constructed. An performance criteria is considered to minimize the effect of the disturbance on the state estimations. Then, by using two further transformation matrices, a non-quadratic Lyapunov function (NQLF), and fmincon in MATLAB as a nonlinear optimization tool, the gains of the SMO are designed through the stability analysis of the observer. The main advantages of the proposed approach in comparison to the existing methods are using nonlinear optimization tools instead of linear matrix inequalities (LMIs), utilizing NQLF instead of simple quadratic Lyapunov functions (QLF), choosing SMO as the observer, which is robust to the uncertainties, and assuming that the premise variables are immeasurable. Finally, a practical continuous stirred tank reactor (CSTR) is considered as a nonlinear dynamic, and the numerical simulation results illustrate the superiority of the proposed approach compared to the existing methods.