Abstract
During high-power laser metal processing, the absorbed light is intimately related to the molten metal cavity shape. For the first time, this relationship is observed directly and simultaneously by implementing state-of-the-art techniques of high-speed x-ray imaging and integrating-sphere radiometry. Experiments were performed on Ti-6Al-4V solid and powder under single spot laser illumination for laser conditions that cause keyhole formation and collapse. The data from x-ray imaging corroborates that a dramatic rise in laser absorption is due to keyhole formation. We also find that the keyhole area correlates most strongly with energy absorption followed closely by keyhole depth. Furthermore, time synchronization reveals correlations between keyhole fluctuations and sinusoidal variations in energy absorption that occur during nominally “stable” keyhole conditions. Absorption data show a 24 % periodic change in absorbed laser power at a 50 kHz frequency. The absorption peaks correlate to relatively large, open keyholes, whereas images taken at the troughs reveal keyholes with substantial undulations of the keyhole sidewalls. These observations give crucial, quantitative data for computational modeling whose aim is to predict porosity and defect formation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.