Abstract
The simultaneous diffusion of inorganic components in the olive pulp in wet brine was modeled based on Fick’s generalized 2nd Law and simulated using the finite element method. The main and crossed diffusion coefficients, the film coefficient and the Biot number were determined, with the application of the simplex optimization method, through the minimization of the percentage errors. The errors between the simulated and experimental data were 5.35% for NaCl and 4.77% for KCl and the adjusted main diffusion coefficients were 0.4358 × 10-12 m2 s-1 for NaCl and 0.5408 × 10-12 m2 s-1 for KCl. The system developed to simulate diffusion allows the control and modulation of the salts content that diffuses through the olive pulp.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.