Abstract
The magnetoplasmadynamic thruster is a typical representative of the high-power electric propulsion device, and the magnetoplasmadynamics process is its core operating mechanism. In order to understand the influence of applied magnetic field on its operating characteristics, the particle-in-cell particle simulation method combined with the scale model based on the self-similarity criterion is used to simulate the operating process of magnetoplasmadynamic thruster with applied magnetic field. The reliability of the model and method are verified by comparing with the experimental results. The plasma characteristic parameter distribution of the thruster during ignition is analyzed, and the influence of external magnetic field and cathode current on the thruster performance are discussed. The research results show that the construction of the discharge arc between the cathode and anode is a key step for thruster ignition and efficient operation. A low-intensity magnetic field is not conducive to the construction of a stable discharge arc, while the plasma beam is concentrated near the axis and the main thrust generation mechanism is the self-field acceleration. The discharge arc between cathode and anode is stable by applying a high magnetic field, and the main mechanism of thrust generation is vortex acceleration, which causes the thrust and specific impulse to increase linearly with the strength of the external magnetic field. The efficiency of the thruster increases with cathode current and the applied magnetic field intensity increasing. The discharge voltage increases with the augment of cathode current, but first decreases and then increases with applied magnetic field intensity increasing.
Highlights
The magnetoplasmadynamic thruster is a typical representative of the highpower electric propulsion device
the Particle-In-Cell particle simulation method combined with the scale model based on the self-similarity criterion was used to simulate the operating process
The reliability of the model and method was verified by comparison with the experimental results
Summary
Field MPDT,AF-MPDT)。本文主要开展 AP-MPDT 工作过程的仿真研究,其主 要结构包括阴极、阳极和电磁线圈,如图 1 所示。 Schematic of AF-MPDT structure and operating principle MPDT acceleration mechanism (a) Self-field acceleration; (b) Hall acceleration; (c) AF-MPDT 推力器[20]作为计算模型,其几何结构如图 3 所示,图中标注单位为 mm,虚线框内为仿真模拟区域。 图 3 MPDT 几何结构与计算区域 Fig. 3 MPDT geometry and simulation area
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
