Abstract
Fracture mechanics and the crack propagation in reinforced concrete members is one of the most important approaches to structural safety analysis. Thanks to powerful software and increasingly fast computers, numerical simulation is well suited to analyse even more complex problems, such as crack growth, quickly and economically. In order to validate these analyses in their application, however, it is still necessary to confirm and compare numerous models of load-bearing and material behaviour by experimental investigations. This paper presents nonlinear numerical simulations of bending and shear crack propagation in reinforced concrete beams without transverse reinforcement. The smeared and discrete crack growth of haunched and non-haunched beams is analysed. Compared are the load deformation behaviour and curves which show the crack width in relation with the applied load without building a notch in the structure. The obtained results are presented with different mesh densities. The tests and the numerical simulations will provide a broad interpretation of crack growth and redistribution of inner forces in concrete members. As numerical method to map discrete cracks the extended finite element method (XFEM) is applied. For validation, the crack patterns of real experiments are compared with the results of the different finite element models up to two crack initiations. The evaluation is based on single span beams under bending and shear. The numerical simulations make it possible to predict the fracture behaviour of concrete members and shows good agreement with the experimental results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.