Abstract
AbstractStirring effects and impacting characteristics of conventional and various swirl‐type oxygen lances (Swirl angles are 5°, 10°, and 13°, respectively) on the molten pool were studied. The mixing time, impacting depth and impacting diameter were measured by water model experiment. The flow field characteristics of gas–liquid two phase flow were simulated using Fluent software. It is found that 10° swirl‐type oxygen lance injection can get the shortest mixing time which is only 47.6 s. The area surrounded by isovelocity is larger in molten pool when injecting by the swirl‐type oxygen lance. When injecting by the 10° swirl‐type oxygen lance, the area is the largest and the flow velocity of liquid steel is the highest. On this basis, the 10° swirl‐type oxygen lance was experimented in 150 t vanadium extraction converter. The experiment shows that the swirl‐type oxygen lance can guarantee the normal smelting process. Compared with the conventional oxygen lance, the reduction ratio of vanadium content in semi‐steel is 17.8%, vanadium extraction rate is increased by 5.1%, V2O5 grade of vanadium slag is increased by 0.93% and iron loss is reduced. It provides a new technology to improve the recovery of vanadium resources in converter.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
