Simulation and Analysis of Strain Sensitivity of CNT-Based Strain Sensors

Abstract

Carbon nanotubes (CNT) is turning out to be a replacement to all the existing traditional sensors due to their high gauge factor, multidirectional sensing capability, high flexibility, low mass density, high dynamic range and high sensitivity to strains at nano and macro- scales. The strain sensitivity of CNT-based strain sensors depends on number of parameters; quality and quantity of CNT used, type of polymer used, deposition and dispersion technique adopted and also on environmental conditions. Due to all these parameters, the piezoresistive behavior of CNT is diversified and it needs to be explored. This paper theoretically analyses the strain sensitivity of CNT-based strain sensors. The strain sensitivity response of CNT strain sensor is a result of change in total resistance of CNT network with respect to applied strain. The total resistance of CNT network consists of intrinsic resistance and inter-tube resistance. It has been found that the change in intrinsic resistance under strain is due to the variation of bandgap of individual, which depends on the chirality of the tube and it varies exponentially with strain. The inter-tube resistance of CNT network changes nonlinearly due to change in distance between neighboring CNTs with respect to applied strain. As the distance [Formula: see text] between CNTs increases due to applied strain, tunneling resistance [Formula: see text] increases nonlinearly in exponential manner. When the concentration of CNTs in composite is close to percolation threshold, then the change of inter-tube resistances is more dominant than intrinsic resistance. At percolation threshold, the total resistance of CNT networks changes nonlinearly and this effect of nonlinearity is due to tunneling effect. The strain sensitivity of CNT-based strain sensors also varies nonlinearly with the change in temperature. For the change of temperature from [Formula: see text]C to 50[Formula: see text]C, there is more than 100% change in strain sensitivity of CNT/polymer composite strain sensor. This change is mainly due to the infiltration of polymer into CNTs.