Simulating permeability of 3-D calendered fibrous structures

Abstract

Many fibrous materials such as nonwoven materials are often consolidated by means of hot calenders, i.e., hot compaction rolls. Hot calendering compresses the fiber assembly and can cause changes in the structure. In nonwovens, calendering has an added function of thermally bonding the fibers at their respective crossovers to form a strong but yet somewhat porous material. Calendering causes a significant increase in the solid volume fraction (SVF) of the media and therefore, affects their permeability. To our knowledge, no work in the literature has been dedicated to modeling the permeability of calendered nonwovens. In this study, virtual nonwoven structures are generated and compressed from top and bottom to resemble the hot calendering process. In agreement with our experimental observations, it was found that the average SVF profile across the material's thickness turns into a U-shape profile after the calendering. In this work, the dimensionless permeability of the calendered media is computed using CFD tools and reported for different compaction ratios. Results of our simulations are compared with the experiment as well as the available empirical and/or analytical permeability models in the literature and good agreement, depending upon the SVF, is observed. We also studied the influence of orientation distribution of the fibers on the dimensionless permeability of the fabric and noticed that permeability decreases by increasing the directionality of the fibers. This is found to be primarily due to the fact that highly oriented uncompressed fiber-webs tend to have a higher SVF. Fiber-webs of identical SVF, however, exhibited almost identical permeabilities regardless of their fiber orientations.