Abstract
Laparoscopic surgery, which is also called minimally invasive surgery, is a surgical technique that is associated with accelerated post-operative recovery. However, it can only be performed by surgeons possessing advanced surgical skills. One of the main challenges in laparoscopic surgery is the restriction of the free motion of forceps because of the limited degrees of freedom imposed by the trocar. Recently, to overcome this problem, many master–slave manipulators with articulated forceps have been used in laparoscopic surgery. The wrist mechanism of the articulated forceps affects the controllability and range of motion of the slave manipulator in the abdominal cavity of a patient. Therefore, improvement of the wrist mechanism of the articulated forceps is important for robot-assisted laparoscopic surgery. This study proposes a new wrist mechanism for using articulated forceps in laparoscopic surgery. The degrees of freedom of the proposed design are provided by motor-driven or manually driven axes employing various wires and pulleys (pitch, yaw, and gripper axes). The kinematic model of this mechanism is decoupled between the pitch axis and yaw axis by a very simple mechanism using arc-shaped guides and wire guide holes. The arc-shaped guides minimize the wire path length error of the yaw and gripper axis wire resulting from the motion of the pitch axis. The optimized position of the arc-shaped guides is decided by the minimal root-mean-square value of the wire path length error. The proposed wrist mechanism has only half the number of parts as compared to the previously developed robotic forceps for clinical use. Furthermore, the effectiveness of the proposed mechanism was demonstrated on a prototype model with a maximum outer diameter of 7.5 mm. Conversely, the disadvantages of the proposed mechanism lie in the transmission mechanism efficiency and no-load input torque.
Highlights
Laparoscopic surgery is a commonly employed minimally invasive surgical techniques
The wrist mechanisms reported in previous papers [6, 7] and a patent [8] proposed by the author are interference mechanisms
Prototype model Based on the abovementioned mechanical design considerations, a prototype model of the proposed wrist mechanism was developed
Summary
Laparoscopic surgery is a commonly employed minimally invasive surgical techniques. In the case of conventional laparoscopic surgery, a surgeon operates using forceps passed through trocars (each approximately 5–10 mm in diameter) into a patient’s abdominal cavity while observing the image acquired by a laparoscope. The most popular wrist mechanism, the da Vinci [1] mechanism, adopts a wire-pulley drive mechanism [5] Articulated forceps that employ a wire-pulley or gear drive mechanisms or both are interference mechanisms. The demerits of this mechanism are discussed . The wrist mechanism of the Kymerax [4], a system of handheld articulated robotic forceps, adopts a combination of the wire-pulley drive and gear drive mechanism [9]. Considering the need for good controllability and a simple wrist mechanism for robot-assisted laparoscopic forceps, this study explores an extremely simple wrist mechanism using the wire drive mechanism. The experimental results obtained using a test bench to validate the proposed mechanism are reported
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
