Abstract
A set of 19 dome-shaped divertor Langmuir probes similar in design to probes used in JET and JT-60 has been used successfully in DIII-D to measure the divertor electron temperature, particle flux, and floating potential. A comparison of the power flux using IR cameras with the particle flux and electron temperature from the probes using collisionless sheath theory has indicated that the particle flux to the divertor surface may be strongly modified by collisions within the magnetic sheath. In order to study this effect, a set of probes have been designed that can be inserted into the divertor plasma using DIMES. Two dome-shaped probes compare fluxes intercepted both above and within the magnetic sheath of the divertor surface. In addition, a third probe oriented normal to the magnetic field is used to verify the projected area of the probe surface. The probe design accommodates parallel power fluxes up to 50 MW/m2 for 30 ms, allowing for the study of beam-heated plasmas in DIII-D.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
