Abstract
This paper investigates the use of carbon fibre-reinforced polymer (CFRP) sheets and plates for the bi-directional reinforcement of reinforced concrete beamswith transverse single and double symmetrical openings. The dimensions of the under-reinforced specimens are 1900mm in length, 150mm in width, and 300mm in height, with 3H12 tension reinforcement, 2H6 compression reinforcement, and R6-300 stirrups. This study aims to compare the maximal shear capacity of each CFRP configuration to that of conventional beams andevaluate the deflection profiles, failure modes, strain distribution, and crack patterns under shear loads. The beams are created using in-situ casting, and the openings are treated using post-drilling techniques to simulate real-world procedures. The beam specimens are subjected to a four-point stress test following the application of Sikadur-330 and CFRP. The principal findings indicate that the application of CFRP sheets increases the ultimate shear strength compared to conventional beams with openings, whereas the application of CFRP plates has the opposite effect. Nevertheless, the control beam with no openings has the greatest ultimate shear capacity. In addition, the sheet reinforced CFRP specimens exhibit less deflection than the control beam and conventional beams. The use of both CFRP sheets and plates aids in the transition from shear failure to flexural failure.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Sustainable Construction Engineering and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
