Sequential Anaerobic and Aerobic Treatment of Kraft Pulping Wastes

Abstract

A study of sequential anaerobic and aerobic treatment was conducted with combinations of kraft evaporator condensate (KEC) and caustic extraction (CE) stage bleaching effluent. In addition to conventional measures of treatment efficiency, the transformations and removal of sulfur compounds from the KEC and changes in molecular size fraction of organic carbon and organic chlorine were measured. A large fraction of the BOD in the combined waste could be removed in the anaerobic stage at loadings of up to at least 15 kg COD/m3-d. The overall process produced an effluent with <30 mg/l BOD and SS and with varying amounts of COD, depending on the CE fraction being treated. Fractional removals of organic carbon and COD were approximately equal and were significantly greater than that of organic chlorine. Removal efficiencies were higher for the low molecular weight fraction. One third of the influent sulfur was removed as H2S gas in the anaerobic stage. The remaining sulfur was largely oxidized to sulfate in the aerobic stage, with nearly complete elimination of odors.