Separation of Palladium along with Minor Actinides by isoBu-BTP/SiO2-P Adsorbent from High-Level Liquid Waste

Abstract

Aiming at the separation of Pd(II) along with MA(III) from high-level liquid waste, a porous silica based adsorbent isoBu-BTP/SiO2-P was prepared. The adsorption properties of isoBu-BTP/SiO2-P toward Pd(II) were investigated. It was found that with the increase of HNO3 concentration, Pd(II) adsorption ability increased initially as HNO3 concentration increased until 1 M, then remained unchanged as HNO3 concentration further increased. The adsorption kinetics and isotherm of Pd(II) onto isoBu-BTP/SiO2-P fit well with the pseudo-second-order rate law and Langmuir adsorption model, respectively. The adsorption thermodynamic parameters revealed that the adsorption process was spontaneous and endothermic. A hot test utilizing isoBu-BTP/SiO2-P packed column was conducted and the simultaneous separation of Pd(II) and MA(III) was achieved from solution by using 0.01 M HNO3-0.1 M TU and 0.01 M HNO3-0.01 M DTPA as eluents, respectively. The Pd(II) with isoBu-BTP/SiO2-P complex was illustrated to be 1:1 type by HRMS...