Abstract
Methods are described for the effective separation and determination of inorganic antimony species by high-performance liquid chromatography (HPLC)–hydride generation (HG) atomic absorption spectrometry (AAS), HPLC–inductively coupled plasma (ICP) mass spectrometry (MS) and HPLC–HG–ICP-MS. SbIII and SbV were separated on a strong anion-exchange column using phthalic acid as the mobile phase. The optimum conditions for the separation of the antimony species by HPLC and the hydride generation conditions for the determination by AAS were established. Then, the HPLC system was connected to an ICP-MS system using either nebulization or hydride generation sample introduction to improve the detection limits. The detection limits were 5 and 0.6 ng per 100 µl sample for SbIII and SbV, respectively (HPLC–HGAAS). For the HPLC–ICP-MS determination these limits were 0.75 and 0.09 ng and 0.04 and 0.008 ng for the HPLC–HG-ICP-MS coupling. The proposed methods for the simultaneous separation of inorganic antimony species were applied to the determination of SbIII and SbV in spiked and natural water samples. Agreement within the statistical uncertainty was obtained in all instances.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
