Abstract
Although it is desirable for a transistor model to be as accurate as possible, the extraction of model parameters from fabricated transistors is a time-consuming and often costly process. An investigation of the sensitivity of low-noise amplifier (LNA) performance characteristics to individual parameters of the physics-based standard HBT model HICUM/L2 was, therefore, done to gain a preliminary insight into the most important parameters for transistors used in actual circuits. This can potentially allow less strenuous accuracy requirements on some parameters which would ease the extraction process. Both a narrow- and wideband LNA configuration were investigated. It was found that the series resistance parameters have a large impact on LNA gain, S 11 and noise figure performance in both cases. Since the narrow-band LNA relied heavily on the transistor characteristics to provide a proper matching, it was also very sensitive to changes in the parameters used in modelling the high-frequency current gain and depletion capacitances of the transistor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.