Sensitivity Analysis of Transient Forced Response of Mistuned Bladed Disks Under Complex Excitation and Varying Rotation Speed

Abstract

Abstract During accelerations and decelerations of gas-turbine engines, the transient vibration effects in bladed disk vibration become significant and the transient response needs to be efficiently and accurately assessed. This paper develops an effective method for efficient calculations of the sensitivity of the transient vibration response for a mistuned-bladed disk under varying rotation speeds. The sensitivities are calculated concerning two major factors: (i) the blade mistuning and (ii) the rotor acceleration/deceleration rates. The method uses the large-scale finite element modeling of the bladed disk to accurately describe the dynamic properties of the mistuned bladed disk. The method can be applied for a case when the loading is the transient load, with the amplitude and frequency spectrum changing with rotation speed. The dependency of the modal characteristics on the rotation speed is included in the formulation of the sensitivity analysis method. Efficient reduced order models are used to reduce the computational cost, which can adapt to the effects of the varying rotation speed on the natural frequencies and mode shapes of the mistuned bladed disk under transient conditions. The expressions for the sensitivities are derived analytically which provides high accuracy and speed of the calculations. The method has been implemented in a computer code and thoroughly verified using a set of test cases. The studies of transient forced response sensitivity have been performed for realistic bladed disk models.