Sensitivity analysis of counterweight double-row pile deformation to weak stratum parameters

Abstract

In order to investigate the sensitivity of weak soil parameters on the deformation of balanced double-row piles, a case study was conducted in a deep foundation pit project in Shenzhen City. A variety of analysis methods, including numerical simulation, field measurements, orthogonal experiments, and theoretical analysis, were employed to analyze the impact of three weak soil parameters on the deformation of balanced double-row piles. The research results showed that the deformation of the front and back rows of piles exhibited overturning deformation, gradually decreasing with depth and reaching the maximum at the pile top due to the constraint effect of the balance platform. The numerical simulation results of horizontal displacements for the front and rear piles were in good agreement with the field measurements, confirming the accuracy and reasonableness of the numerical analysis model and parameter selection. Through a series of orthogonal numerical simulation experiments, it was determined that the cohesive strength (C) of soft layers, such as rockfill and silt, is a key factor, the internal friction angle (φ) is an important influencing factor, and the elastic modulus (E) is a general influencing factor. Theoretical analysis was employed to establish the relationship curve between each parameter and the maximum pile deformation, as well as the sensitivity factors, further verifying the impact of these weak soil parameters. The research findings presented in this paper can provide valuable guidance for geotechnical engineers when selecting geological parameters for similar deep excavation projects.