Sensing Toxic Carbonyl Compounds in Cigarette Smoke by Photonic Crystal Fiber

Md Ekhlasur Rahaman,Abdullah Al-Mamun Bulbul,Rayhan Habib Jibon,Md Bellal Hossain,Md Mahmud Hassan,Himadri Shekhar Mondal,Avijit Saha

doi:10.1109/icccnt49239.2020.9225607

Md Ekhlasur Rahaman, Abdullah Al-Mamun Bulbul + Show 5 more

https://doi.org/10.1109/icccnt49239.2020.9225607

Copy DOI

Export

Save

Cite

Abstract
Full-Text
Similar Papers

Abstract

Listen

We have proposed a photonic crystal fiber (PCF) based sensor to sense toxic carbonyl air droplet found in cigarette smoke. A circular lattice PCF has been designed with four air holes ring in the cladding region and the circular shaped core used for analyte fill-up. In the proposed PCF, elliptical air holes are also used in the cladding region to improve guiding properties of the PCF. The commercial software COMSOL Multiphysics 5.3a has been used to simulate the entire geometry and to find out different optical parameters such as relative sensitivity, confinement loss, effective material loss (EML) and effective mode area at frequency range of 0.5 THz-1.5 THz. To find out the optimal geometrical conditions of the proposed PCF sensor, cladding air holes strut has been varied. At optimal conditions, simulation result shows that maximum relative sensitivity of 69%, 72%, 74% has been achieved for acetone, acrolein and nicotine respectively. The confinement loss of 4.19 ×10 -7 cm -1 , 8.46 ×10 -8 cm 1- , 2.51 ×10 -9 cm -1 has been achieved for acetone, acrolein and nicotine respectively. The obtained effective material loss and effective mode area also comparable with recently reported PCF sensor. We strongly believe that by exiting fabrication technology, the proposed PCF sensor will be feasible for fabrication.

Full Text