Abstract
Laboratory experiments and modeling analysis have been conducted to gain insight on the self-excited unstable flame behaviors of a model gas turbine combustor that utilizes a low-swirl injector (LSI). The combustor consists of a 5.7cm I.D. LSI firing into 18cm diameter by 32cm or 20.3cm long cylindrical enclosures at atmospheric condition. The experiments involved lean premixed turbulent CH4 (0.6<ϕ<0.7) and 0.9 H2/0.1 CH4 (0.3<ϕ<0.4) flames at bulk flow velocities of 12 and 18m/s. Acoustic spectral information was obtained from pressure transducers. A laser-based flame motion detection method was used to determine the locations and frequencies of flame oscillations. Phase-resolved 2D velocity statistics of the reacting flow fields was measured by particle image velocimetry (PIV). Self-excited unstable flame behaviors were found for the richer flames burning in the 32cm long chamber at 18m/s. The incited acoustic frequencies correspond to the first longitudinal mode of the combustor computed by the General Instability Model (GIM) program. Flame oscillations are found primarily in the region along the outer shear layer (OSL) of the LSI rim and the oscillation frequencies are consistent with the acoustic frequencies. Phase-resolved PIV show the OSL convects ring vortices shed from the rim. The trajectories of the vortex centers enable a linear instability analysis by GIM. For the CH4 flame, analysis shows that the roll up vortices from the dump plane are responsible for generating self-excited acoustically coupled flame instability. For the 0.9 H2/0.1 CH4 flame, the GIM analysis suggests a dominance of shedding vortices but is less conclusive due to flame attachment to the LSI rim resulting from the highly reactive H2 fuel and possible unsteady heat release contributions from bulk flow oscillations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.