Abstract
The self-polarization effect is investigated in Pb(Zr,Ti)O3 (PZT) thin films deposited by sol-gel and magnetron sputtering techniques. The effective piezoelectric coefficient of as-grown films, which is proportional to their initial polarization (self-polarization), is measured by a sensitive interferometric technique as a function of the annealing temperature, PZT composition, film thickness and bottom electrode material. The results indicate that the films are self-polarized by an internal bias field upon cooling through the phase transition temperature. It is suggested that a built-in field of a Schottky barrier between the PZT film and the bottom electrode is responsible for the observed effect. Self-polarization of the films is found to be very stable and in some cases to be as high as 90% of that produced by the subsequent room temperature poling. This property is very useful for piezoelectric and pyroelectric applications of PZT films since the poling procedure can be avoided. The properties of self-polarization are found to be similar for the films produced by sol-gel and sputtering techniques, suggesting that the same mechanism is operative in both cases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.