Selective removal of divalent cations by polyelectrolyte multilayer nanofiltration membrane: Role of polyelectrolyte charge, ion size, and ionic strength

Abstract

We fabricated polyelectrolyte multilayer (PEM) nanofiltration (NF) membranes using a layer-by-layer (LbL) method for effective removal of scale-forming divalent cations (Mg2+, Ca2+, Sr2+, and Ba2+) from feedwaters with different salinities. Two polymers with opposite charges, polycation (poly(diallyldimethylammonium chloride), PDADMAC) and polyanion (poly(sodium 4-styrenesulfonate), PSS), were sequentially deposited on a commercial polyamide NF membrane to form a PEM. Compared to pristine and PSS-terminated membranes, PDADMAC-terminated membranes demonstrated much higher rejection of divalent cations and selectivity for sodium transport over divalent cations (Na+/X2+) due to a combination of both Donnan- and size-exclusion effects. A PDADMAC-terminated membrane with 5.5 bilayers exhibited 97% rejection of Mg2+ with selectivity (Na+/Mg2+) greater than 30. We attribute the order of cation rejection (Mg2+ > Ca2+ > Sr2+ > Ba2+) to the ionic size, which governs both the hydration radius and hydration energy of the cations. The ionic strength (salinity) of the feed solution had a significant influence on both water flux and cation rejection of PEM membranes. In feed solutions with high ionic strength, abundant NaCl salt screened the charge of the polyelectrolytes and led to swelling of the multilayers, resulting in decreased selectivity (Na+/X2+) and increased water permeability. The fabricated PEM membranes can be potentially applied to the pretreatment of mild-salinity brackish waters to reduce membrane scaling in the main desalination stage.