Abstract
The bi-functional Ni–W@C catalysts were prepared by one-pot reduction–carbonization method and used in hydrogenolysis of cellulose as well as raw lignocellulosic biomass to chemicals. The catalytic performance for cellulose conversion showed that it was more favorable for ethylene glycol (EG) production, obtaining the highest EG yield 60.1% over the Ni–W@C700 catalyst. The Ni–W@C bimetallic catalysts are systematically characterized with BET, XRD, Raman, XPS, TEM techniques and experiments to probe the active catalytic sites of the catalysts. The effects of calcination temperature of Ni–W catalysts, reaction time, temperature and H2 pressure on cellulose hydrogenolysis were investigated in detail. The Ni particles could lead to produce more W5+ active sites, which promotes the glucose retro-aldol condensation to break the target C–C bonds. Metallic Ni catalyzed C=O hydrogenation and C–C hydrogenolysis, which could also avoid the coke formation. The EG selectivity was dependent on the synergy of WOx and Ni metal sites. In addition, this synergistic effect between the metal and WOx could promote lignin component degradation in direct conversion of untreated raw lignocellulosic biomass, obtaining the propyl monophenolics including guaiacylpropane, syringylpropane and p-n-propylphenol with a total yield of 17.3 wt% besides EG.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.