Abstract

Capacitive deionization (CDI) is an emerging desalination technology with an environmental-friendly operation and energy-efficient properties. However, activated carbon (AC) used for CDI electrode does not have a significant preference toward anions, leading to unnecessary energy consumption for treating fluoridated water. Hence, we achieved selective fluoride removal in CDI system using a reduced graphene oxide/hydroxyapatite composite (rGO/HA), a novel fluoride selective electrode material. The results showed that the rGO/HA electrode has 4.9 times higher fluoride removal capacity than the AC electrode from a ternary solution consisting of fluoride, chloride, and nitrate ions. The fluoride removal capacity increased when the adequate voltage was applied. Furthermore, the rGO/HA electrode exhibited stability and reusability without significant capacity loss even after 50-cycle operation, maintaining about 0.21 mmol g−1 of fluoride removal capacity and approximately 96% of regeneration efficiency. Thus, this study suggests a novel electrode material for effective and selective fluoride removal in the CDI system.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.