Abstract
In the present work we discuss on the seismic vulnerability of reinforced concrete existing buildings. In particular we consider a reinforced concrete building originally designed for only gravitational loads and located in a zone recently defined at seismic risk. According to the Italian seismic code NTC 2008 a displacement based approach is adopted and the N2-method is considered for the nonlinear seismic analysis. In the analysis all the masonry infill panels in effective interaction with the structural frame are considered for the nonlinear modeling of the structure. The influence of the effective masonry infills on the seismic response of the structure is analyzed and it is discussed how the effect of the masonry infills irregularly located within the building can give rise to a worsening of the seismic performance of the structure. It is shown that in the present case a not uniform positioning of the masonry infills within the building can give rise to a fragile structural behavior in the collapse mechanism. Furthermore a comparative analysis is performed by considering both the structure with the effective masonry infills and the bare structural frame. For these two structures a pushover analysis is performed, the relative capacity curves are derived and it is shown that fragile collapse mechanisms can occur depending on the irregular positioning of the effective masonry infills. Accordingly it is discussed how in the present case a decoupling of the effective masonry infills from the structural frame can give rise to a smoother response of the capacity curves. For the examined case of an obsolete building with irregular positioning of the masonry panels, the choice of decoupling the effective masonry panels from the structural frame may facilitate the retrofitting strategies for the achievement of the proper safety factors at the examined limit states.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have