Seismic reflection imaging of thin, kimberlite dykes and sills: exploration and deposit characterization of the Snap Lake dyke, Canada

Abstract

Listen

Translate article

Seismic reflection techniques are, for the first time, used to image a thin, diamondiferous, kimberlite dyke from subcrop to depths greater than 1300 m. Exploration for vertical kimberlite pipes generally utilizes potential field techniques that often fail to reveal subhorizontal or shallow-dipping intrusions. In contrast, seismic reflection methods are well suited for imaging targets with this geometry. Therefore, in order to evaluate seismic reflection as a tool for subhorizontal kimberlite dyke/sill exploration and mine planning, a feasibility study and subsequent seismic survey were undertaken on the diamondiferous Snap Lake dyke (Northwest Territories, Canada). A substantial drilling program has mapped the dyke as a gently dipping sheet that averages 2–3 m in thickness. The detailed structural and composition data available at Snap Lake provides a unique opportunity to test reflection techniques on a well-sampled deposit. The feasibility study involved measuring P-velocities and densities of cores drilled from the kimberlite and host rocks. These data were used to model reflection amplitudes, evaluate resolution limitations, and determine the acquisition parameters for the reflection survey. Two 2-D lines were acquired that provide comparative datasets for different sources (explosive and vibroseis) and ground types (land and lake ice). In addition, the exploration-scale survey incorporated high fold (40–260 nominal) and long offsets (3260 m). The explosive-source profile recorded on land yielded a superb image of the dyke from depths of 60 m to more than 1300 m over a lateral distance of 5700 m. The seismic image correlates well with adjacent drill hole data and adds considerable detail to the topography of the kimberlite sheet determined by drilling. The vibroseis source also imaged the dyke, but only when sources and geophones were on land; the dyke was not imaged beneath the ice due to reverberation and attenuation effects. The frequency response and unusually strong reflection amplitudes from the dyke indicate the importance of tuning effects and multiples for this type of target and acquisition environment. Apparent correlations between reflection amplitudes and dyke structure (e.g., thickness, feathering, 3-D geometry) suggest that seismic reflection data may be valuable for guiding drilling programs. The results demonstrate that, in the appropriate situation, seismic methods have great potential for use in kimberlite exploration, subsurface mapping, and detailed imaging for mine development purposes.