Abstract
A large-scale, two-span bridge model constructed by assembling precast elements was tested under a series of bi-axial ground motionssimulated on a shake table at the Earthquake Engineering Laboratory at the University of Nevada, Reno. The response of the bridge wasestimated before the tests using a three-dimensional computational model developed in OpenSees software. After the tests, key measuredseismic responses were compared to those predicted by the computational model to assess the modeling assumptions. Relatively largeerrors for the displacements, base shears, and hysteretic response of the bridge were observed. The influence of the earthquake loading,materials, connectivity of the precast elements, and boundary conditions in the computational model on the errors are discussed in thispaper. Future modeling directions are proposed to reduce these errors.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call