Second Generation Intact Stability Criteria Fallout on Naval Ships Limiting KG Curves

Abstract

The International Maritime Organization (IMO) finalized the Second Generation Intact Stability Criteria (SGISC), in February 2020. They are intended to be included in Part A of the 2008 International Code on Intact Stability in the following years. The SGISC consider five modes of dynamic stability failure in waves: parametric roll, pure loss of stability, surf-riding/broaching to, dead ship condition and excessive acceleration. In this paper, two semi-displacement, round bilge and transom stern hull forms, the parent hull of the Systematic Series D and the ONR Tumblehome, i.e. typical naval hull forms, are examined. Although naval ships are not directly impacted by SGISC, they are sensitive to dynamic stability failure phenomena due to their geometry and range of service speeds. The procedures to assess the ship vulnerability to the dead ship condition and excessive acceleration criteria, referring to the latest drafts of the criteria (SDC 7/5, 2019), were implemented in Matlab®,. The limiting KG curves associated with this set of criteria were obtained for each vessel. The minimum allowable KG curve associated with the excessive acceleration criterion was compared with the maximum allowable KG curve associated with dead ship condition, to investigate the existence of a safe operational area.