Abstract
Many coastal regions have recently faced significant challenges due to the excessive accumulation of sargassum. This genus of brown marine algae generates greenhouse gases such as methane and carbon dioxide during decomposition, as well as toxic gases such as hydrogen sulfide and ammonia. The substantial influx of these algae on shores brings far-reaching impacts on the environment, climate, health, and the economy. One way to mitigate these impacts is by using this biomass for energy production and applying the resulting ash as an alternative material in the construction industry. As such, this study aims to analyze the feasibility of sargassum ash as a replacement for limestone in fiber cement. This not only offers an environmentally responsible solution for its disposal, but also adds economic value to a material commonly seen as a waste. Several analyses were conducted on the physical and mechanical properties of fiber cement with varying percentages of limestone replaced by sargassum ash (0, 25, 50, 75, and 100 %), as well as its durability and Life Cycle Assessment (LCA). The fiber cement with 100 % sargassum ash exhibited a 74 % increase in specific energy compared to the fiber cement without the ash after accelerated aging. This mix design also presented better environmental performance in 15 of the 18 impact categories. The results demonstrate that ash holds potential as an alternative material in fiber cement manufacturing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.