Screening of waste biomass from Saccharomyces cerevisiae, Aspergillus oryzae and Bacillus lentus fermentations for removal of Cu, Zn and Cd by biosorption.

Abstract

Three by-products of fermentations containing Bacillus lentus, Aspergillus oryzae or Saccharomyces cerevisiae biomass were tested for the capacity to absorb Cu, Cd and Zn. The composition of the three biomasses was first determined and showed high contents of ashes in both B. lentus and A. oryzae biomass and high amounts of lipids in the bacterial biomass. Metal ion binding experiments were performed by contact of 0.1 g of biomass (protonated for all the metal tests and not protonated only for the Cd test) with 50 ml of solutions containing each of the metals in the concentration range from 10 to 500 mg/ml, at pH 4.5, 3.5 and 2.5. The final metal ion concentrations were determined using a plasma absorption spectrometer, and the metal removal levels for isotherm plots were determined using the Langmuir model. The results showed that B. lentus protonated biomass had the best sorption capacity for Cu and Cd, followed by protonated A. oryzae and S. cerevisiae biomass. The sorption of Zn was low for all tested biomasses, as also was the binding of all metals at acidic pH (2.5 and 3.5). A significant increase in Cd sorption was obtained using non-protonated biomass from B. lentus and A. oryzae.