SCARA TIPI 3D YAZICI TASARIMI VE İMALİ

Abstract

This study designed and produced a Selective Compliance Assembly Robot Arm (SCARA)-type three-dimensional Fused Deposition Modelling (FDM) printer with three degrees of freedom based on kinematic and dynamic analyses. The dynamic capability of a SCARA robot and the FDM production method were combined, and a unique printer system was obtained by using open-source software. The Kinematic Calculations were achieved by analytical methods by using geometrical equations. An open-loop control system was created by inputting forward kinematic and inverse kinematic equations to the control software. The printing processes of the Cube and Prism samples were carried out with the SCARA-type three-dimensional printer. The data obtained from the analytical calculations and the results obtained from the experiments were compared, and the error rates in the desired and obtained prints and findings that were obtained based on print quality were shared. Academic studies on SCARA in the literature have usually focused on the dynamic calculations, design and control of SCARA robots, and especially in recent years, implementation of nature-inspired algorithms. A unique printer system was obtained by using open-source software. Prints were taken from cube and prism samples, and the samples were compared to the data obtained from the analytical results.This study implemented a form of a hybrid printer model where the movement capability of a SCARA robot was combined with FDM-type three-dimensional printer production technology. The SCARA-type three-dimensional printer was produced after making kinematic and kinetic calculations.