Abstract
Atomic images of the misfit layer compounds (LaSe)xNbSe2 and (PbSe)xNbSe2 were obtained with a scanning tunneling microscope (STM) operating in constant height mode in air. It was possible to record pictures of only the NbSe2 layers of both compounds, the LaSe and PbSe layers could not be observed. Formation of stage-2 portions embedded in the stage-1 crystal and instability of the LaSe and PbSe layers under the scanning conditions are discussed as possible causes. Comparing with the NbSe2 crystal, the lattice of the NbSe2 layers of the misfit layer compounds appear deformed. Nonperiodic Moiré-like structures have been observed in the (LaSe)xNbSe2 surface. We consider that this feature is caused by the STM tip pushing down the surface where it is softer. The nonperiodicity of the patterns might be due to the strain conditions of the crystal growth that would give rise to dislocations and defects.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.