Abstract

This paper presents an experimental study on characterising the aerodynamic and far-field acoustic performance of rotors operating in non-axial inflow conditions. The current experiments were carried out with a two-bladed rotor, operating with a tip Mach number of 0.56, approaching the practical tip Mach numbers expected of urban air mobility vehicles. Synchronous measurements of the aerodynamic force, far-field acoustics and blade phase angle were undertaken to provide insights on both the time-averaged and phase-averaged correlation between the rotor aerodynamic loading and the emitted noise. The far-field acoustic spectra are compared across a range of advance ratios (0.01≤μ≤0.04) and forward tilting angles (0°≤α≤30°). When the inflow velocity increases, both the tonal and broadband components increase. Moreover, higher harmonics of the blade passing frequency are observed to become more prominent at higher advance ratios. As the rotor tilts forward from edgewise flight conditions, the broadband noise component reduces significantly, with the tones at fundamental blade passing frequency and higher harmonics also reducing in magnitude, agreeing well with the steady and unsteady thrust coefficients measured. From the aerodynamic loading, acoustic spectra and the directivity results, a transition from near-edgewise to near-axial modes of operation can be discerned at a tilt angle of approximately 16°. More interestingly, the phase-averaged thrust and acoustic power results show notable variations of the blade loading and acoustic emission through one full rotor rotation. At higher advance ratios and shallow tilting angles, the phase location of peaks in the root-mean-square of the fluctuating thrust coefficient agrees very well with those from the acoustic power, suggesting a strong correlation between the flow unsteadiness and the noise at these non-axial conditions, contributing to higher overall sound pressure levels.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.