Rotational molding cycle time reduction through surface‐enhanced molds, Part B: Experimental study

Abstract

AbstractRotational molding is a process used to manufacture hollow plastic products, and has been heralded as a molding method with great potential. Because of long production cycle times, which are limited by the time required to heat‐up and cool‐down the mold and the product, its productivity is hampered. To address this issue, exterior mold modification techniques (i.e. the application of extended and rough surfaces) have been employed to enhance heat transfer to and from molds, ultimately reducing cycle times. Extended surfaces have the potential to enhance heat transfer by increasing the surface area. Roughness elements are utilized in conjunction with turbulent flows, also producing significant increases in heat transfer rates. Experimental results presented here demonstrate very significant cycle time reductions through the use of surface‐enhanced molds. The experimental savings are in the order of 18 and 28%, whereas the predicted cycle time reductions are around of 21 and 32% for roughness‐enhanced and pin‐enhanced molds, respectively. Although the prediction methods have been unable to forecast the exact experimental cycle times very accurately, they have proved to be useful for predicting the approximate cycle time reductions and the relative rankings of the plain and the surface‐enhanced molds. POLYM. ENG. SCI., 47:1420–1429, 2007. © 2007 Society of Plastics Engineers