Role of process parameters during additive manufacturing by direct metal deposition of Inconel 718

Abstract

PurposeThe aim of this research is to study the influence of laser additive manufacturing process parameters on the deposit formation characteristics of Inconel 718 superalloy, the main parameters that influence the forming characteristics, the cooling rate and the microstructure were studied.Design/methodology/approachOrthogonal experiment design method was used to obtain different deposit shape and microstructure using different process parameters by multiple layers deposition. The relationship between the processing parameters and the geometry of the cladding was analyzed, and the dominant parameters that influenced the cladding width and height were identified. The cooling rates of different forming conditions were obtained by the secondary dendrite arm spacing (SDAS).FindingsThe microstructure showed different characteristics at different parts of the deposit. Cooling rate of different samples were obtained and compared by using the SDAS, and the influence of the process parameters to the cooling rate was analyzed. Finally, micro-hardness tests were done, and the results were found to be in accordance with the micro-structure distribution.Originality/valueRelationships between processing parameters and the forming characteristics and the cooling rates were obtained. The results obtained in this paper will help to understand the relationship between the process parameters and the forming quality of the additive manufacturing process, so as to obtain the desired forming quality by appropriate parameters.