Abstract
The physically-chemically bounded water is an important parameter directly related to the gain of mechanical strength during the hydration of cements. In this work, quantitative determinations of the physically - chemically bounded water of two types of belite cements, called FABC-2-W and FABC-2-N, were carried out by means of thermogravimetry analyses during a period of 180 days of hydration. The hydrated products were characterized by X-ray diffraction and BET surface area. Important direct quantitative correlations were obtained between the combined water and technological characteristics of cements such as the compressive mechanical strength or the BET surface area. TG measurements for hydrated FABC-2-W and FABC-2-N cements were carried out in flowing nitrogen on a TGA/SDTA 851 (Mettler) in the temperature range from 25 to 1100°C with heating rate of 10 °C min-1 and nitrogen flow rate of 25 mL min-1. BET surface area was measured using nitrogen adsorption at 77 K, on an ASAP 2010 (Micromeritics).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.