Robust Preparation of Sub-20-nm-Thin Lamellae for Aberration-Corrected Electron Microscopy.

Abstract

Aberration-corrected scanning transmission electron microscopy (STEM) has been advancing resolution, sensitivity, and microanalysis due to the intense demands of atomic-level microstructural investigations. Recent STEM technologies require preparing a thin lamella whose thickness is ideally below 20 nm. Although focused-ion-beam/scanning-electron-microscopy (FIB/SEM) is an established method to prepare a high-quality lamella, nanometer-level controllability of lamella thickness remains a fundamental problem. Here, the robust preparation of a sub-20-nm-thin lamella is demonstrated by FIB/SEM with real-time feedback from thickness quantification. The lamella thickness is quantified by back-scattered-electron SEM imaging in a thickness range between 0 and 100 nm without any reference to numerical simulation. Using real-time feedback from the thickness quantification, the FIB/SEM terminates thinning a lamella at a targeted thickness. The real-time feedback system eventually provides 1-nm-level controllability of the lamella thickness. As a proof-of-concept, a near-10-nm-thin lamella is prepared from a SrTiO3 crystal by ourmethodology. Moreover, the lamella thickness is controllable at a target heterointerface. Thus, a sub-20-nm-thin lamella is prepared from a LaAlO3 /SrTiO3 heterointerface. The methodology offers a robust and operator-independent platform to prepare a sub-20-nm-thin lamella from various materials. This platform will broadly impact aberration-corrected STEM studies in materials science and the semiconductorindustry.