Robust output regulation of a class of smart actuators described by a minimum phase LPV dynamics

Abstract

This paper presents a new control strategy for a class of minimum phase linear parameter-varying (LPV) systems representative of smart material actuators. In position control applications of such devices, one is typically interested in achieving output regulation with an arbitrary exponential decay rate. In principle, this problem can be tackled by assigning an exponential decay rate to the full system state, by means of well-established linear matrix inequalities (LMI) methods. For the class of systems under investigation, however, this approach leads to excessively large controller gains in case the desired decay rate is faster than the open-loop zero dynamics. In addition, the existence of unmeasurable state variables related to the material microstructure makes it not possible to directly implement full state feedback laws which are commonly adopted in LPV theory. To overcome these issues, a new design strategy is proposed. The key idea relies on arbitrarily shaping the output exponential decay rate without requiring fast convergence of the full state vector. This goal is achieved by means of a partial state feedback control law which solely depends on the measurable system states. A LMI algorithm is also developed to systematically address the design of the partial state feedback controller. The method is validated by means of simulations on generic examples, as well as via experiments on a mechatronic positioning system based on a dielectric elastomer membrane. In case the desired output convergence speed is faster than the open-loop zero dynamics, it is shown that the new approach leads to better transient behaviors and significantly smaller controller gains than standard LPV design techniques.