Abstract

A very important task in Mobile Cognitive Radio Networks (MCRN) is to ensure that the system releases a given frequency when a Primary User (PU) is present, by maintaining the principle to not interfere with its activity within a cognitive radio system. Afterwards, a cognitive protocol must be set in order to change to another frequency channel that is available or shut down the service if there are no free channels to be found. The system must sense the frequency spectrum constantly through the energy detection method which is the most commonly used. However, this analysis takes place in the time domain and signals cannot be easily identified due to changes in modulation, power and distance from mobile users. The proposed system works with Gaussian Minimum Shift Keying (GMSK) and Orthogonal Frequency Division Multiplexing (OFDM) for systems from Global System for Mobile Communication (GSM) to 5G systems, the signals are analyzed in the frequency domain and the Rényi-Entropy method is used as a tool to distinguish the noise and the PU signal without prior knowledge of its features. The main contribution of this research is that uses a Software Defined Radio (SDR) system to implement a MCRN in order to measure the behavior of Primary and Secondary signals in both time and frequency using GNURadio and OpenBTS as software tools to allow a phone call service between two Secondary Users (SU). This allows to extract experimental results that are compared with simulations and theory using Rényi-entropy to detect signals from SU in GMSK and OFDM systems. It is concluded that the Rényi-Entropy detector has a higher performance than the conventional energy detector in the Additive White Gaussian Noise (AWGN) and Rayleigh channels. The system increases the detection probability (PD) to over 96% with a Signal to Noise Ratio (SNR) of 10dB and starting 5 dB below energy sensing levels.

Highlights

  • Mobile Cognitive Radio Networks (MCRN) have been developed to improve spectrum management for Primary User (PU) given that frequency spectrum holes are used in the transmission of Secondary Users (SU) [1]

  • A random bits generator was used to generate the date and it is modulated in Gaussian Minimum Shift Keying (GMSK)

  • The threshold is calculated depending on the Signal to Noise Ratio (SNR) values and figures of the probability of detection (PD), probability of false alarm (PFA) and receiver operation characteristics (ROC) curves are generated

Read more

Summary

Introduction

MCRN have been developed to improve spectrum management for PU given that frequency spectrum holes are used in the transmission of SU [1]. The first task of this technology is to identify said holes within a certain frequency range through one of two alternatives. While one considers that the cognitive system has a priori knowledge of the PU signal, the other alternative consists of a blind process where the signal is unknown [2]. Mobile technologies from 1G to 5G involve different modulation schemes according to the service, distance and SNR of each user. In order to identify the PU signal, a technology must be chosen to determine the frequency range in the spectrum sensing process [3]. Once the frequency range is found, a spectrum analyzer is used to determine the power

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call