RNN for Repetitive Motion Generation of Redundant Robot Manipulators: An Orthogonal Projection-Based Scheme.

Abstract

For the existing repetitive motion generation (RMG) schemes for kinematic control of redundant manipulators, the position error always exists and fluctuates. This article gives an answer to this phenomenon and presents the theoretical analyses to reveal that the existing RMG schemes exist a theoretical position error related to the joint angle error. To remedy this weakness of existing solutions, an orthogonal projection RMG (OPRMG) scheme is proposed in this article by introducing an orthogonal projection method with the position error eliminated theoretically, which decouples the joint space error and Cartesian space error with joint constraints considered. The corresponding new recurrent neural networks (NRNNs) are structured by exploiting the gradient descent method with the assistance of velocity compensation with theoretical analyses provided to embody the stability and feasibility. In addition, simulation results on a fixed-based redundant manipulator, a mobile manipulator, and a multirobot system synthesized by the existing RMG schemes and the proposed one are presented to verify the superiority and precise performance of the OPRMG scheme for kinematic control of redundant manipulators. Moreover, via adjusting the coefficient, simulations on the position error and joint drift of the redundant manipulator are conducted for comparison to prove the high performance of the OPRMG scheme. To bring out the crucial point, different controllers for the redundancy resolution of redundant manipulators are compared to highlight the superiority and advantage of the proposed NRNN. This work greatly improves the existing RMG solutions in theoretically eliminating the position error and joint drift, which is of significant contributions to increasing the accuracy and efficiency of high-precision instruments in manufacturing production.