Rice Husk Ash as a Low Cost Adsorbent for the Removal of Methylene Blue and Congo Red in Aqueous Phases

Abstract

AbstractAdsorption is of significant importance for effluent treatment, especially for the treatment of colored effluent generated from the dyeing and bleaching industries. Low cost adsorbents have gained attention over the decades as a means of achieving very high removal efficiencies to meet effluent discharge standards. The present article reports on batch investigations for color removal from aqueous solutions of Methylene Blue (MB) and Congo Red (CR) using Rice Husk Ash (RHA) as an alternative low cost adsorbent. The performance analysis was carried out as a function of various operating parameters, such as initial concentration of dye, adsorbent dose, contact time, shaker speed, interruption of shaking and ionic concentration. Performance studies revealed that a very high percentage removal of color was achievable for both dyes. The maximum percentage removal of MB was 99.939%, while 98.835% removal was observed for CR. These percentage removals were better than existing systems. Detailed data analysis indicated that adsorption of MB followed the Temkin isotherm, while CR followed the Freundlich isotherm. These isotherms were feasible within the framework of experimentation. Batch kinetic data, on the other hand, indicated that pseudo second order kinetics governed adsorption in both cases. Sensitivity analysis further indicated that the effects of initial dye concentration, shaker speed, pH and ionic strength had no noticeable effect on the percentage dye removal at equilibrium. Batch desorption studies revealed that 50% acetone solution was optimum for CR, while desorption of MB varied directly with acetone concentration.