Abstract
AbstractA three-dimensional finite-element model is used to analyze field data collected as dirty basal ice flowed past an instrumented obstacle at the bed of Engabreen, a temperate glacier in northern Norway The ice is modeled as an incompressible power-law fluid, with viscosity , where ΠD is the second invariant of the stretching tensor, and B and n are two parameters. Using measurements obtained in 1996 and 1997, two values of B are obtained, one using the measured normal stress difference across the obstacle, and the other using the measured bed-parallel force over the instrument. These two values are not equal, probably owing to small frictional forces at the bed unaccounted for in the numerical model. Hence, B ranges between 1.9 × 107 and 3.2 × 107 Pa s1/3 in 1996, and between 2.2 × 107 and 4.1 × 107 Pa s1/3 in 1997. These values are smaller than measured elsewhere for clean glacier or laboratory ice. Field measurements of water content, fabric and texture of the basal ice suggest that unbound water between thin sediment layers and lamellae of clean ice may act as a lubricant and significantly weaken the ice. Near-isotropic fabrics indicate that preferred fabric orientation does not enhance the deformation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.