Abstract
This paper correlates the evolution of the rheological and thermal properties with microstructure during the phase change of a blend of bitumen with a selected paraffin wax, having a melting point centred around 60 °C, for the development of bituminous based membranes for thermal energy storage applications. For this purpose, temperature sweep tests within the linear viscoelastic range, stationary state flow curves, Differential Scanning Calorimetry (DSC), polarised optical microscopy observations and solar irradiation tests were performed. The reported rheological results clearly point out a gel-like behaviour for both paraffin and paraffin/bitumen blend that is preserved almost up to the end of the phase change interval. This is consequence of the development of a network of interconnected crystals of paraffin wax which progressively disappear as temperature increases. Interestingly, a weak gel structure is kept even at low crystallinity levels since only a few junctions among structures are necessary to build a spanning network. Finally, the large degree of crystallinity of paraffin wax retained in the bitumen/paraffin wax is behind its thermoregulation ability, as was corroborated by solar irradiation tests. Therefore, results indicated the great potential of these formulations for thermal energy storage and related applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.