Review of anthropometric considerations for tractor seat design

Abstract

Tractor driving imposes a lot of physical and mental stress upon the operator. If the operator's seat is not comfortable, his work performance may be poor and there is also a possibility of accidents. The optimal design of tractor seat may be achieved by integrating anthropometric data with other technical features of the design. This paper reviews the existing information on the tractor seat design that considers anthropometry and biomechanical factors and gives an approach for seat design based on anthropometric data. The anthropometric dimensions, i.e. popliteal height sitting (5th percentile), hip breadth sitting (95th percentile), buttock popliteal length (5th percentile), interscye breadth (5th and 95th percentile) and sitting acromion height (5th percentile) of agricultural workers need to be taken into consideration for design of seat height, seat pan width, seat pan length, seat backrest width and seat backrest height, respectively, of a tractor. The seat dimensions recommended for tractor operator's comfort based on anthropometric data of 5434 Indian male agricultural workers were as follows: seat height of 380 mm, seat pan width of 420–450 mm, seat backrest width of 380–400 mm (bottom) and 270–290 mm (top), seat pan length of 370±10 mm, seat pan tilt of 5–7° backward and seat backrest height of 350 mm. Relevance to industry The approach presented in this paper for tractor seat design based on anthropometric considerations will help the tractor seat designers to develop and introduce seats suiting to the requirements of the user population. This will not only enhance the comfort of the tractor operators but may also help to reduce the occupational health problems of tractor operators.