Abstract
Abstract Tungsten mine waste mud (TMWM) geopolymeric binder is a new cementitious material with a very high early age strength. It is obtained from dehydroxylated mine waste powder mix with minor quantities of calcium hydroxide and activated with NaOH and waterglass solutions. Tests on properties of TMWM binders such as workability, setting time, unrestrained shrinkage, water absorption and static modulus of elasticity were carried out and the results are reported in this paper. This is followed by comparisons with literature related data and a discussion about it. The results showed that current devices use to assess OPC fresh properties are not recommended to evaluate TMWM binders. It has also been found that traditional procedures used to evaluate unrestrained shrinkage may be responsible for misleading results when using those new binders. Water absorption data shows that TMWM has a very compacted structure. Results concerning the static modulus of elasticity are similar to the ones obtained by other authors. However the hypothesis related to modulus of elasticity decrease due to the use of high Al/Si alkali activated mixtures was not confirmed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
