Abstract
The rapid consumption of natural sources due to the technological development brings environmental and economic problems and makes usage of alternative sources obligatory. Fly ash is one of an industrial waste that can be used as alumina silicate source for geopolymerization. In this study, fly ash based geopolymer was synthesized by Alkali Fusion Method. The experimental set up was designed by Design Expert Trial 7 program and the optimum geopolymer synthesis conditions including additional Al2O3 ratio, curing temperature were determined by Central Composite Inscribed Design (CCI) Method. Also, ANOVA analysis and optimization were carried out. X-ray fluorescence spectrometer (XRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscope-Energy-dispersive X-ray (SEM-EDX) and Brunauer–Emmett–Teller (BET) analyzes were applied for the characterization studies of the raw materials and optimum geopolymer sample. According to optimization and analysis results, the optimum Al2O3 addition (%) and curing temperatures were determined as 70.76% and 36.75 °C, respectively. The degree of geopolymerization reaction for optimum geopolymer sample was found as 97%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
