Abstract

The Regional Atmospheric Modelling System (RAMS)-based Forest Large-Eddy Simulation (RAFLES) model is used to simulate the effects of large rectangular prism-shaped semi-porous barriers of varying densities under neutrally buoyant conditions. RAFLES model resolves flows inside and above forested canopies and other semi-porous barriers, and it accounts for barrier-induced drag on the flow and surface flux exchange between the barrier and the air. Unlike most other models, RAFLES model also accounts for the barrier-induced volume and aperture restriction via a modified version of the cut-cell coordinate system. We explicitly tested the effects of the numerical representation of volume restriction, independent of the effects of the drag, by comparing drag-only simulations (where we prescribed neither volume nor aperture restrictions to the flow), restriction-only simulations (where we prescribed no drag), and control simulations where both drag and volume plus aperture restrictions were included. Previous modelling and empirical work have revealed the development of important areas of increased uplift upwind of forward-facing steps, and recirculation zones downwind of backward-facing steps. Our simulations show that representation of the effects of the volume and aperture restriction due to the presence of semi-porous barriers leads to differences in the strengths and locations of increased-updraft and recirculation zones, and the length and strength of impact and adjustment zones when compared to simulation solutions with a drag-only representation. These are mostly driven by differences to the momentum budget of the streamwise wind velocity by resolved turbulence and pressure gradient fields around the front and back edges of the barrier. We propose that volume plus aperture restriction is an important component of the flow system in semi-porous environments such as forests and cities and should be considered by large-eddy simulation (LES).

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.