Residual fracture energy of cement paste, mortar and concrete subject to high temperature

Abstract

Quantifying high temperature damage is an issue that can hardly be dealt with experimentally because of the complexity of the loading control, of temperature and of moisture. The experimental investigation was carried out. The measurement of the mechanical characteristics (fracture energy, tensile strength, elastic modulus and thermal damage parameter) of five cementitious materials, cement paste, mortar, ordinary concrete and two HPC concretes were performed by three-point bending tests after heating/cooling cycles at 120, 250 and 400 °C. The tests showed that the cementitious materials behave almost identical when the fracture energy G f is considered as a function of maximum temperature. The thermal damage due to heating from 120 to 400 °C increases the fracture energy by 50% with the reference tests at room temperature. A more tortuous crack surface is one reasonable explanation for the significant increase in G f . It is demonstrated that the temperature exposure makes all cementitious materials tested significantly more ductile and less resistant.