Effect of crack surface friction on stress intensity factor for double-edge cracked Brazilian disk specimens under parabolic distribution load

Abstract

The weight function method was employed to derive the closed-form solutions of stress intensity factors (SIFs) for double-edge cracked Brazilian disk (DECBD) specimens subjected to parabolic distribution loads, taking into account the influence of crack surface friction. Additionally, the accuracy and validity of these solutions were discussed in comparison with previous numerical results. Furthermore, the impact of friction coefficient and load distribution angle on SIFs was further investigated. The results indicate that the effect degree of load distribution angle on SIFs is closely correlated with both the loading angle θ and crack length α. Both the mode I and mode II SIFs increase with increasing load distribution angle γ for θ = 15° and α < 0.4. However, when α ≥0.60, the impact of load distribution angle γ on SIFs becomes negligible. Furthermore, the friction between crack surfaces of DECBD specimens significantly affects the dimensionless mode II SIF YII, leading to a decrease in dimensionless mode II SIF YII as the friction coefficient μ increases. Moreover, it further demonstrates that both the relative crack length α and friction coefficient μ play important roles in determining the critical loading angle θIIc for crack sticking. The critical loading angle θIIc for crack sticking increases with an increasing relative crack length; however, an increase in the friction coefficient leads to a reduction of this critical loading angle θIIc.