Abstract
AbstractAbstract in order to study the torque ripple of permanent magnet synchronous motor for electric vehicle, the method of modular poles instead of single pole is adopted to reduce the torque ripple. The modular poles consist of three kinds of permanent magnets with different remanence and are arranged in a sinusoidal distribution. The pole arc length and position of each magnetic pole are calculated according to the cutting area of sinusoidal air gap flux density wave. By changing the cutting area of sinusoidal air gap flux density wave, the optimal pole arc coefficient of each permanent magnet was determined, and the magnet pole combination with the smallest torque ripple value is obtained. The results show that the sine degree of back electromotive force is improved obviously, the cogging torque is decreased greatly, and the motor with modular poles has obvious effect on torque ripple suppression. The torque of the motor with different kinds of magnetic pole combination is more stable than that of the motor with the same kind of magnetic pole combination. In this paper, the method of using modular poles instead of single pole to reduce torque ripple is of positive significance, which provides a reference for the subsequent performance optimization of electric vehicle motor. © 2023 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEJ Transactions on Electrical and Electronic Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
