Research on experimental parameter selection for measuring thermal diffusivity by laser flash method at room temperature

Abstract

Based on the laser flash method, the selection of experimental parameters on the accuracy of measurement results for measuring thermal diffusivity is investigated in this paper. High purity graphite is employed as the experimental material. Three experimental parameters are taken into consideration, including specimen thickness, laser pulse power, and laser pulse width. Firstly, the principle of the laser flash method is introduced. Then, a numerical simulation model is established and independence tests are performed. In order to investigate the impact of different experimental parameters to the precision of the measurement results using the laser flash method, six thicknesses of the specimens, five laser pulse powers, and five laser pulse widths are selected for numerical simulation and LFA 427 measurement experiments. Finally, an orthogonal design method with three-factor and three-level is constructed to investigate the influence degree of these three factors on the measurement results. It is found that the laser pulse width has the most significant influence, while the laser pulse power has the least impact. For high purity graphite specimens, it is required to choose a thicker specimen, a lower laser pulse power, and a smaller laser pulse width to ensure better measurement accuracy.